Overhead door A

Swivelling. Robust. Proven.

A simple and robust design with low installation depth. With sturdy lever arms and runners. With safety spring assemblies. Ideal for collective and private garages.  

Thanks to the sophisticated lifting mechanism and the flexible frame construction, the up-and-over door A can be used universally - within a collective garage as well as in private garages. Spring assemblies consisting of individual tension springs ensure weight equalisation. They can be easily replaced individually and guarantee a high level of security. In addition, there are flush wicket or side doors that allow direct access to the car park if required.

KIPPTOR A - unique values

robust

Swing-out door system in more uncomplicated Lightweight aluminium construction 

Proven

mature, durable Lifting mechanism with maintenance-free Storage  

  • Simple design with low installation depth
  • Lifting mechanism with sturdy lever arms, bearing blocks and guide rails
  • Polyamide castors with ball bearings

Colours and surfaces

When building the doors, we focus entirely on your ideas so that you can perfectly match all surfaces and colours of door panels or door coverings to your building. We also offer numerous examples of tried and tested solutions. The choice is yours.

Customised

This selection of individual surfaces exemplifies the unique combination of architectural design and precise technology.

Proven solutions

The following sample door panels are available as standard in E6/EV1 anodised finish (sash profile / cover plate). Beaded sheet coverings are galvanised as standard. Of course, all profiles, infills and coverings can be coated in all RAL, DB and other special colours.

Fillings
Door leaf: Aluminium frame construction
Infill: Perforated aluminium sheet RV 5/8
Ventilation cross-section filling: approx. 35 %

Round perforated sheet

Door leaf: Aluminium frame construction
Filling: Smooth aluminium sheet
Ventilation cross-section filling: 0 %

Smooth sheet

Door leaf: Aluminium frame construction
Filling: aluminium square tube 20 x 20 mm
Ventilation cross-section filling: approx. 70 %

Bar grille

Door leaf: Aluminium frame construction
Filling: Aluminium expanded metal mesh
Ventilation cross-section filling: approx. 74 %

Expanded metal mesh

Coverings

Door leaf: Aluminium frame construction
Filling: Perforated steel sheet RV 5/7
Ventilation cross-section filling: approx. 45 %

Perforated bead plate

Door leaf: Aluminium frame construction
Filling: corrugated sheet steel
Ventilation cross-section filling: 0 %

Bead plate

Technical details

Our doors can be adapted to a wide variety of installation situations and fitted with a wide range of accessories.
To make it easier for you to plan your individual door, we have summarised the most important installation dimensions and components here:

KÄUFERLE WORKBOOKS

In our Käuferle Workbooks, we offer architects, planners and builders an overview of our diverse product range and our comprehensive services. So that you are always well informed.

KÄUFERLE WORKBOOKS

In our Käuferle Workbooks, we offer architects, planners and builders an overview of our diverse product range and our comprehensive services. So that you are always well informed.

Käuferle garage door service

Käuferle offers an all-round door service for the maintenance and repair of collective garage doors throughout Germany. With specially trained specialists and original spare parts. So that your door always runs smoothly.

Käuferle garage door service

Käuferle offers an all-round door service for the maintenance and repair of collective garage doors throughout Germany. With specially trained specialists and original spare parts. So that your door always runs smoothly.

More garage doors

Newsletter

Would you like to receive regular information about our products, offers and events? Then sign up for our newsletter.

We are here for you!

Please select product and contact - so we can direct your message to the right contact person:
Which products are we talking about?
Who would you like to speak to?
Please give us your contact details now and we will process your request as quickly as possible!
Thank you very much!
You are
Message / Details

FAQs

Garage doors

Please contact our customer service when all preliminary work (such as laying the cables) has been completed and the gate area can be walked on freely. We will then arrange an individual appointment with you.
After your door system has been approved, you will receive a cable routing plan tailored to your order. This plan shows all the cables that the electrician you have commissioned will need in order to carry out all the work.
Inspections and maintenance of gate systems are regulated by law in Germany. However, many operators of gate systems are not aware that they have this responsibility. We would be happy to make you an offer for one-off maintenance or a maintenance contract. Your gate system will then be serviced once a year by our expert fitters.
Door systems are subject to heavy use on a daily basis, which can result in wear and tear. Thanks to the simple and clear design, some parts can be replaced quickly. Our customer service will be happy to help you. You can reach us on 0180 3900505 or at [email protected].

Due to defined exceptions in the standards and guidelines, an emergency stop command device is not mandatory for our door systems, which of course comply with the latest state of the art.

Please replace both springs. The springs are calculated for fixed load changes. If one spring breaks, the second spring is also just before the calculated breaking limit and should therefore be replaced. Our customer service team can offer you the necessary spare parts or carry out the repair of the gate system on request.

Partition systems

We will be happy to supply you with a locking cylinder for each door. However, this is not integrated into the locking system of your building. If you prefer a cylinder that matches the locking system, you will need a half cylinder in size 10/30 for our UTS doors with a PZ handle and a half cylinder in size 30/60 for doors with a lever handle set.

Not found what you are looking for?

Our customer service will be happy to help you.
You can reach us at 0180 3900505 or under [email protected].

Käuferle tender texts

We are here for you!

Please select product and contact - so we can direct your message to the right contact person:
Which products are we talking about?
Who would you like to speak to?
Please give us your contact details now and we will process your request as quickly as possible!
Thank you very much!
You are
Message / Details

*Compulsory field

Sales for gates, partition systems and enclosures

Sales Office North-East
Sales Office West
Rhine-Main sales office 2
Rhine-Main sales office 1
Sales office Baden-Würtemberg
Sales office Bavaria West
Munich sales office
Sales office Bavaria-East
Sales Office East
Sales office Poland
Branch office Austria
Sales office Switzerland

Sales for windows and doors

Central Internal Service Resale
Baden-Wuerttemberg & Bavaria

Door service

Southwest service centre
Service centre Bavaria
Rhine-Main service centre
Service Centre West
Northeast service centre
Service Centre East

Aichach plant

Käuferle GmbH & Co. KG

Door installation data

STANDARD SIZE RANGE

maximum 6 x 2.5 m, depending on the weight of the covering. The LDH can be further reduced by installing a wicket door or by using static reinforcement profiles on the door leaf.

STANDARD SIZE RANGE

maximum 6 x 2.5 m, depending on the weight of the covering. The LDH can be further reduced by installing a wicket door or by using static reinforcement profiles on the door leaf.

STANDARD SIZE RANGE

maximum 6 x 2.5 m, depending on the weight of the covering. The LDH can be further reduced by installing a wicket door or by using static reinforcement profiles on the door leaf.

Gates components

Drive K 120 RV/GV

low-noise ceiling hoist drive, 230 volts: with toothed belt and adjustable push rod, soft start and soft stop, electronic power cut-off and integrated radio receiver - including securing of the main closing edges by opto-sensor strip as well as optional emergency stop button near the door.

Operator KFU 125 RV/GV for overhead door NA perfect

Low-noise and robust ceiling hoist drive, 230 volts: with frequency converter, transverse steel roller chain, soft start and soft stop - including protection of the main and secondary closing edges by opto-sensor strip as well as optional emergency stop button near the door.

Key switch column
Hollow steel profile (galvanised and powder-coated in DB 703) with built-in key switch and aluminium cover plate, prepared for profile cylinder (half cylinder 10/30); foundation dimensions: 300 x 260 mm x frost depth
Key switch
Consisting of a robust aluminium housing and a built-in key switch with aluminium cover plate, prepared for the installation of a profile cylinder (half cylinder 10/30)
Ceiling pull switch
Easy-to-mount pull switch with long pull chain - in robust design for effortless opening of the gate when exiting.
Radio code switch

Non-contact key switches offer maximum security and are available with key fobs (RFI-Key) or RFI-Key-Card in credit card format.

Headlight flasher switch

Convenient opening of the gates with the help of a radio module that reacts to light horn signals from exiting vehicles.

Induction pulse generator

Pulse generator from loop detector and cable, protection class IP 65. fahrbahnintegrated Loop gives at ÜBerfahrt den contact with the ToröOpen. Closing takes place automatically after the set time phase has elapsed.  

Light barrier as safety device

serves to safeguard the gate wing swing range and has been required for power-operated gate systems in automatic mode since DIN EN 13 241 came into force.

Daily and weekly timer

Freely programmable door opening times - after the selected and set time has elapsed, the door closes automatically.
Control for collective garages
Käuferle offers the RV type with red early warning phase as standard control for collective garages. Optionally, the control type GV is also available for lanes with oncoming traffic. Both controls were specially developed for the operation of door systems in collective garages. They include a light activation as well as the testing of the safety edge and a reversing function that automatically switches the running direction of the door leaf when it encounters an obstacle. All our controls offer a potential-free contact for connection to on-site building services, such as a BUS system or an alarm system.
Radio control
A modern multi-channel system that is ideally suited for use in larger properties. Your hand-held transmitter is individually programmed to your door system before delivery and thus offers the highest possible security. The management software developed for this product allows us to program up to 2000 hand-held transmitters for your radio receiver.
Käuferle offers the RV type with red early warning phase as standard control for collective garages. Optionally, the control type GV is also available for lanes with oncoming traffic. Both controls were specially developed for the operation of door systems in collective garages. They include a light activation as well as the testing of the safety edge and a reversing function that automatically switches the running direction of the door leaf when it encounters an obstacle. All our controls offer a potential-free contact for connection to on-site building services, such as a BUS system or an alarm system.
TYPE RV Door control with red lights
Individually adjustable red pre-warning phase with automatic gate closing: When a contact is triggered, the gate opening process is initiated and the red traffic lights light up on both sides. When the gate is fully open, the traffic lights go out. After a defined time phase has elapsed, the traffic lights switch to red again and after a short pre-warning time, the gate's closing process begins. When the gate is closed again, the traffic lights go out. All time intervals are individually programmable.
TYPE GV Gate control with red/green lights
Two-way traffic control with automatic gate closing: Triggering a contact starts the opening process of the gate and the red traffic lights light up until the gate is fully open. Then the traffic lights for one direction are switched to green and the passage from this direction is released. After a time phase has elapsed, the traffic lights switch back to red. After a short delay time, the gate starts to close. During the entire process, the traffic light of the opposite direction is switched to red and the lane is thus blocked. When the gate is closed, the traffic lights go out. All time intervals are programmable.
Integrated gate doors

Wicket doors can be integrated into the door leaf or placed next to the door as a side door. Steel parts are optimally protected against corrosion by galvanising and in some cases additionally by coating, aluminium profiles by anodising or powder coating.

Doors with concealed hinge

NewWicket doors can also be equipped with a concealed hinge and thus be integrated into the door leaf almost invisibly from the outside.

Fades

For a perfect design interplay between the door and the façade, we manufacture individual panels with a robust substructure made of aluminium profiles.

Thank you for your feedback!

Your message was transmitted

We will get back to you as soon as possible!

Thank you for your request!

We will take care of your request immediately and get back to you as soon as possible.